Chiller Rentals For Planned Or Emergency

Air cooled chillers would be unfavorable for industries, which have walls higher than the unit. They require continuous flow of fresh air and an obstructed air flow may create problems with recirculation. Water chilled coolers are more suitable, when there’s a lack of space and restricted air flow. A chiller equipped with a fixed speed compressor controls the temperature of the water traditionally with simple on/off of the compressor.

The report also provides the knowledge regarding the products offered and services given by the top key players in the market. The report provides historic data which gives an overview of the past performance of the industry and the key strategies which will help the businesses to be a market leader in the forthcoming future. CTCA’s Air-cooled Portable Chiller Plants and Portable Water-cooled Chiller Plants so that we can accommodate our customers different needs.

Portable chillers are available in capacities from ¼ – 40 tons and supply process fluid between 20° – 70°F. Our goal is to provide innovative industrial cooling systems with excellent performance and high efficiency. When you consider that chillers are often one of the largest consumers of energy inside a building, their performance can have a huge impact on operational costs.

It is 208/230 volt, 3 phase power, scroll compressor, R410a refrigerant, and 44°F+ fluid/glycol “standard” temperature range. Consult with us if 28°F glycol temps needed or if it’s for a brewery. It is outdoor rated and has an insulated tank and a 2 hp process pump.

The federal supply sources for energy-efficient products are the General Services Administration and the Defense Logistics Agency . GSA sells products through its Multiple Awards Schedules program and online shopping network, GSA Advantage!. DLA offers products through the Defense Supply Center Philadelphia and online through FedMall (formerly the U.S. Department of Defense eMALL). Products sold through DLA are codified with 13-digit National Stock Numbers and, in some cases, a two-letter Environmental Attribute Code . The ENAC identifies items that have positive environmental characteristics and meet standards set by an approved third party, such as FEMP.

Tent Systems

The European designed units are wonderfully engineered, and can run in low ambient conditions as well as high ambient conditions. They are also suitable for Glycol fluid chilling in the 28°F range, but equally as fine for your industrial cooling application too. Units are 460 volt 3 phase power, and were run and tested thoroughly in our shop prior to shipping. These 5 ton Koolant Koolers chillers went through refurbishment here at KIG. They feature a robust tube type rectangular exchanger which is cleanable. Fabricated and installed a new stainless reservoir tank, and an appropriate centrifugal water pump .The units were piped in a “closed loop” configuration.

Air-cooled chillers are almost always located outside of a building and remove heat from the chilled water by exhausting the heat directly to the surrounding air. After exiting the heat exchanging coil, the chilled water return returns to the chiller, where it is cooled again, and the process repeats. While the heat exchanging coil is cooled by the chilled water, a fan blows air through the coil to provide cold air to the building’s space. The supply air temperature that is blown out of AHUs and FCUs is usually about 55 °F.

Danfoss products and solutions make up to 70% of chiller systems and bring multiple benefits for OEMs, consulting engineers and building owners in various industries and building types. air cooled chillers that are easy to install, easy to repair and will give you significant savings. The air cooled chiller is compact in size allowing for easy installation in places where space is severely limited. We are your source for high-performing and affordable comfort chilling coolers for your large residence or commercial application. Access our products through your trusted refrigeration wholesaler or request a quote for a comfort cooling chiller online or call . If your residential or commercial property is in a coastal or harsh environment, our comfort cooling chillers stand out from others on the market.

Unit was run and tested at KIG and sold with a money back guarantee. Acquired by KIG in March 2015 was this nice 14 ton York YCAL series Air Cooled Chiller. We refurbish/test/sell about 100 chillers annually from our Clinton MA facility, and this unit was run and tested here prior to shipment, and sold with a money back guarantee of functionality.

The unit can be used for applications ranging from winery, brewery, frozen yogurt, plating/anodizing, manufacturing , etc. This chiller was run and tested extensively at KIG’s 13,000 square-foot facility before being shipped out. Arrived in March 2020 was this nice 2010 Econochill 5 ton Air Cooled Chiller.

Source treatment is a measure taken to reduce the amount of noise generated by the source rather than treating the symptoms of the noise. Common source treatments include HUSHCORE® products to attenuate the compressor circuits, the condenser fan air intakes and the condenser fan discharge/exhaust. In depth video on one of our SSCD air cooled screw chillers featuring our President, Tim Baker.

The unit was in storage in the Southeast USA for a few years, as it was purchased by our client, but their business situation changed so they never used it. We paid a local chiller specialist to inspect megger compressors, confirm operation of the low ambient option, power up controls, and do overall inspection. This chiller has the original 4 scroll compressors in it (that’s good, no mis-application problems causing compressor swap-out), and low ambient option for year round operation in colder climates. Dual refrigeration circuits, with 1 circuit having hot gas bypass . It is 230 volt, has dual scroll compressors and comfort link controls.